How to Hang Pictures on Cement Walls
If you want to hang a photo or a couple of them, you can choose a fantastic and simple way to make any of your house space cozy. Hanging photos on a concrete wall isn’t that easy thing comparing to framing them in wood. But don’t let this get in your way. Here you’re with a couple of useful ways to place a photo on solid cement and all of them are not that difficult to follow.
The three most widespread methods to put your delighting memories on concrete are adhesive hooks, stiff hangers, and masonry anchorages. Now, we’ll discuss the three of them thoroughly with some good advice from professional interior designers.
Putting pictures on a concrete wall will appear not so challenging as it may seem at first when you know the procedure!
What Equipment You Need to Hang Pictures on Cement Walls
As it’s been already mentioned, there’re three common methods of hanging pictures on cement walls. They correspond to the primary equipment you need to buy for the work:
- Adhesive hooks
- Stiff hangers
- Masonry anchorages
Each of those methods works very well to put a picture on the concrete, but they’re intended to perform various things. They all have their advantages and disadvantages that we’ll talk about later.
To find out the best installation method, think of the following important questions:
- Can you drill something for a long time in the wall?
- How long will this picture hang out there? Do you need a standing frame or something temporary?
- How heavy is your picture?
- How big is your picture?
- How much can you spend?
It’s crucial to determine the installation method that best suits your specific situation. For instance, if your stuff is quite heavy, then it’s preferable to provide permanent support that can manage the weight. But if you hang a photo for a while or if it’s very lightweight, then a stick on the mount is usually the right decision.
Step-by-Step Guide on How to Hang Pictures on Cement Walls with Adhesive Hooks
The use of adhesive hooks for hanging a picture on a concrete wall is not that difficult. But you should mind certain steps to ensure that the hooks attach tightly to the wall.
Clean Up the Wall
To have a really steady grip, you have to clean up the area where you want to work. Place a small amount of cleaning agent on a paper napkin or rag and wipe the area.
Glue onto them sticks more effectively on a scrub top. If you notice dust or filth on the wall, you won’t have a good grip.
Tag the Spot
Ensure the tag is level as once the hook is there, you can’t change it afterward. It’s best not to hurry, be accurate and avoid errors.
Hang It on the Wall
The adhesive anchorage has a plastic cover to protect the glue. Take off the plastic coating to expose the glue. Don’t touch it as the oils on your finger may soften the paste. Gently press the wall anchor for approximately 30 seconds.
Ensure that you carefully align the hook exactly where you want and push tightly, but not too much.
Let It Dry
Wait for at least an hour before hanging something on a hook. When the time is up, place your photo.
If your photo is a lot bigger than the hook can sustain, then it can pull directly out of the wall. If this occurs, then get harder ones or get more of them. It’s a good idea to use two or more to put a huge photo.
Step-by-Step Guide on How to Hang Pictures on Cement Walls with Stiff Hangers
The hangers are fast and easily installed on a concrete wall. These are just a few actions, and contrary to the adhesive hangers, it’s not necessary to clean up the working area.
Tag the Area
Mark the precise place where you want to set up the hanger. The stiff hangers are hard to move afterward, therefore there’ll be no chance of adjusting the hook later.
Mounting
Put the hanger at the point indicated. Keep it stationary with one hand as you use another one to tack all four pins through the wall.
Just hammer the pins halfway at the beginning. Before pushing them down completely, stop and see if the hook holds its positioning and is stationary in the correct place. Once you confirm that this is where you need it, keep pounding the bolts.
In case the hook is out of place, you’ll need to remove it and adjust it. This may be a problem as it’s impossible to make two holes together. There’s no need to be in a hurry. So make sure that the hook is in a perfect position before you nail.
Don’t try to make everything fast. Pound the pins tightly, but don’t overdo. This is not like hammering a nail. Going slow will help you hold the crochet in the appropriate area until all the pictures are safe. It will also help in preventing accidents and possibly saving you a finger or even two.
Put the Picture in
Hang the photo you want and ensure it’s straight. As with the adhesive hooks, be certain not to place a photo that is too big for the foliage hanger. If you overload these, you can tear the hooks off the wall.
Step-by-Step Guide on How to Hang Pictures on Cement Walls with Mansory Anchors
A masonry anchor is the most solid and permanent way to hang a photo on a concrete wall. Some may hold more than 10 times the load of a hard wall mount and more than 30 times the weight of the adhesives.
Masonry anchors are offered in a wide range of style solutions, size charts, and materials used. Each intended to serve a distinct intent. Get the one according to the needed volume of picture load you plan to maintain.
Apply the Right Instruments
Masonry anchorages need a pilot hole to be drilled through the solid wall, which needs special equipment. You may use any drill to do this if there’s a proper piece, it’s preferable to get a jackhammer. A hammer drill doesn’t rotate as a conventional drill. Hammering and rotation work well with a drill through a wall more effectively than a drill that solely turns around.
When you have a hammer drill and a brand-new drill bit, drilling through a solid wall is simple and usually takes less than 30 seconds, providing you don’t stumble a rock.
There’re stones inside the solid wall referred to as aggregates. If you’re unlucky and hit any of them while piercing your driver hole, then just muscle through. It’s more difficult to drill through rock than cement, but pieces of masonry can do this. Pass by the stones slowly; from time to time recede the piece and let cool down.
Bits
The bought package will show you the depth of the hole should be and the width. But the correct size, the length of the piece, and the diameter for making the hole.
Spot and Drill
Mark where you want to drill before you drill. A masonry anchorage is permanent, therefore it should be very precise. No adjustment later on. A jackhammer puts pressure on you with its pounding action. It makes drilling through concrete much easier.
Be sure to drill the right hole rather than at an angle. This ensures that the anchor head is in line with the wall.
Place It
After the hole has been drilled, secure the anchor. Most of the masonry anchorages for the picture need a plastic piece to hammer into the hole, then a screw. All you have to do is slowly pushing in the plastic and screw in the screw.
Don’t hit the plastic too hard and too deep. This should end right next to the wall.
If you’re having trouble drilling the anchor, you may have made a too narrow hole or, vice versa, not down far enough. Adapt according to your needs.
Mounting the Screw
Here’s the easy part. You can use a screwdriver or a screw gun to carry out this task. It’s going fine anyway. You’re trying to shut down the screw before it gets close to the wall for some to come out.
A little gap between the screwhead and the wall lets you adjust the image thread a bit.
Final Words on How to Hang Pictures on Cement Walls
Hanging pictures on the wall is a great way of making a building more like your home. But if you have concrete walls, it’s much more difficult to do. It all boils down to the question of whether you can have permanent or temporary holes.
If the property belongs to you, make permanent holes. On the contrary, if you’re renting, then your landlord won’t be happy to see a bunch of steady holes in his property.